• Lithium Specialists
  • Free Shipping
  • High-Quality Batteries
  • Unrivaled Support

Image with Text Overlay

Pair text with a large full width image to give focus to areas of your store.

12V 200Ah LiFePO4 HT Series Professional Bluetooth (150Amp BMS)

£1,375.00

Quantity
  • 12V 200Ah LiFePO4 Lithium Battery (HT) Professional High Current (150Amp Continuous drain BMS) WITH BLUETOOTH

    The HT Series Professional are designed for High Usage applications and each 200Ah Battery can supply sufficient current handling to run a 2Kw inverter. You can put up to 4 batteries in Parallel to support up to a maximum of 8Kw progressive current handling. However we recommend that 5Kw would be a more reasonable system as some loads have a initial high start up current, respecting this allows some headroom to avoid any potential surges activating the BMS Over current protection. (Each battery has a pulse discharge of 320Amps for less than 5 seconds. with Perfect connections that would allow 4 batteries to tolerate a load of up to 1280 Amps! )

    Some of our competitors so called 'high current' batteries have a maximum current handling BMS of 100Amps and a peak of 150Amps for 15 seconds. This HT Series is double that for pulse discharge and 60% more for std discharge. To find any performance close to this you need to be looking at Super B batteries and or Victron units that typically sell for 2-3 x the price of our HT model.

    The HT battery is the same cylindrical cell Professional High Current battery but with Added BLUETOOTH connectivity to monitor state of charge, temperature, charge or discharge current etc.

    Our professional high current batteries with 150-160Amp BMS* are designed and built to last, to deliver power above and beyond the capability of the lower cost models. This over engineering is why we have not seen problems with BMS Failure that is reported for some other manufacturers products, whose current handling is not sufficient for the demands placed upon batteries in typical situations with high load applications.

    Deep cycle leisure battery that is ideally suited for use in motor homes, power boats, sailing craft, canal boats, caravans, RV’s, invalid carriages, personal mobility scooters, electric vehicles at 12V, 24V,36V,48V through series connections. Electric trolling motors. Mobile Electric lift trucks, Powered trolleys etc.

  • ELECTRICAL SPECIFICATIONS
    Model HT12200
    Nominal Voltage 12.8V
    Nominal Capacity 200Ah
    Energy 2560Wh
    Self Discharge <3%/month
    Maximum Modules in Series or Parallel 4
    MECHANICAL SPECIFICATIONS
    Dimensions (L x W x H) 520 x 240 x 220 mm (20.5 x 9.4 x 8.7”)
    Weight 27.8kg (61 lbs)
    Terminal Type M8
    Case Material ABS
    Enclosure Protection IP56
    Cell Type Cylindrical
    Chemistry LiFePO4
    CHARGE SPECIFICATIONS
    Recommended Charge Current 40A-100A
    Maximum Charge Current 100A
    Charge Current (0 to -10 ºC) ≤0.1C
    Charge Current (-20 to -10 ºC) ≤0.05C
    Recommended Charge Voltage 14.2V – 14.6V
    BMS Charge Voltage Cut-Off 15.4V (3.85 ±0.025 vpc, 1~1.5s)
    Reconnect Voltage 15V (3.75 ±0.05vpc) / 15.2V (3.8 ±0.05vpc)
    DISCHARGE SPECIFICATIONS
    Maximum Continuous Discharge Current 160A (or 100A)
    Peak Discharge Current 320A/5s (or 200A/5s)
    BMS Discharge Current Cut-Off 400A/9ms (300A/9ms)
    Recommended Low Voltage Disconnect 10V
    BMS Discharge Voltage Cut-Off 8V (2.0±0.05vpc, 120~180ms)
    Reconnect Voltage 9.2V (2.3±0.1vpc)
    TEMPERATURE SPECIFICATIONS
    Discharge Temperature -20 to 60 ºC (-4 to 140 ºF)
    Charge Temperature 0 to 45 ºC (32 to 113 ºF)
    Storage Temperature (1 month) -20 to 60 ºC (-4 to 140 ºF)
    Storage Temperature (3 months) -20 to 45 ºC (-4 to 113 ºF)
    Storage Temperature (6 months) -20 to 25 ºC (-4 to 77 ºF)
    COMPLIANCE SPECIFICATIONS
    Certifications CE, UN38.3, MSDS
    Shipping Classification UN 3480, CLASS 9
  • Product Data Sheet

Product Reviews